DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0122: Lost Communication With Vehicle Dynamics Control Module [08/2019 - ]: Description

WARNING: This page is about a different variant/trim than selected.

This DTC is output when communication is lost with the skid control ECU (master cylinder solenoid) or ECM.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
U0100	Lost Communication with ECM / PCM "A"	Diagnosis Condition: Ignition switch turned to ON (3 seconds elapse after ignition switch is turned to ON) Malfunction Status: Communication is lost between ECM and 4 wheel drive control ECU Malfunction Time: 1.85 seconds or more Other: 1 trip detection logic	CAN communication system
U0122	Lost Communication with Vehicle Dynamics Control Module	Diagnosis Condition: Ignition switch turned to ON (3 seconds elapse after ignition switch is turned to ON) Malfunction Status: Communication is lost between skid control ECU and 4 wheel drive control ECU Malfunction Time: 0.72 seconds or more Other: 1 trip detection logic	CAN communication system