LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> 4Runner Limited, RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Hydraulic) - Service Information >> Brake Master Cylinder >> Reassembly [08/2015 - ] >> Procedure

Reassembly [08/2015 - ]: Procedure

  1. INSTALL MASTER CYLINDER RESERVOIR GROMMET 
    1. Apply a light coat of lithium soap base glycol grease to 2 new master cylinder reservoir grommets.
    2. Install the 2 master cylinder reservoir grommets to the brake master cylinder reservoir assembly.
  2. INSTALL BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY 
    1. Install the brake master cylinder reservoir assembly to the brake master cylinder body.
    2. Using a pin punch and hammer, install a new pin to the brake master cylinder reservoir assembly.
  3. INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER 
  4. INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY 
  5. INSTALL BRAKE FLUID INFORMATION LABEL 
scientia non olet · About LEMON Manuals