LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> 4Runner Limited, RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Hydraulic) - Service Information >> Brake Master Cylinder >> Disassembly [08/2015 - ] >> Procedure

Disassembly [08/2015 - ]: Procedure

  1. REMOVE BRAKE FLUID INFORMATION LABEL 
  2. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY 
    1. Remove the brake master cylinder reservoir filler cap assembly from the brake master cylinder reservoir assembly.
  3. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER 
    1. Remove the brake master cylinder reservoir strainer from the brake master cylinder reservoir assembly.
  4. REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY 
    1. Using a pin punch and hammer, remove the pin from the brake master cylinder reservoir.
  5. REMOVE MASTER CYLINDER RESERVOIR GROMMET 
    1. Remove the 2 master cylinder reservoir grommets from the brake master cylinder reservoir assembly.
scientia non olet · About LEMON Manuals