Caution / Notice / Hint
NOTE:
- As brake fluid may overflow, do not leave the brake fluid can in the reservoir filler opening when adding brake fluid.
- Bleed air while adding fluid to maintain the fluid level between the MIN and MAX lines of the reservoir.
- Do not allow brake fluid to come into contact with any painted surface. If contact occurs, wash off the fluid immediately.
- When bleeding air, select the suitable procedure listed below.
Replaced/Installed Item Work procedure Flexible hose (front/rear) Bleed brake line Disc brake cylinder assembly (front/rear) Brake actuator assembly Bleed brake system Brake master cylinder sub-assembly Brake master cylinder reservoir assembly Brake booster assembly