Caution / Notice / Hint

NOTE:

Perform brake fluid replacement with the shift lever in P and the parking brake set.
Perform brake fluid replacement while adding fluid to maintain the fluid level between the MIN and MAX lines of the reservoir.
As brake fluid may overflow when fluid is released from the brake actuator, do not leave the brake fluid can in the reservoir filler opening when adding brake fluid.
If the brake pedal is depressed with the reservoir cap removed, brake fluid may overflow.
Do not allow brake fluid to come into contact with any painted surface. If contact occurs, wash off the fluid immediately.
When the brake fluid is replaced, DTCs may be stored. Therefore, after fluid replacement, always clear the DTCs and check that a normal system code is output.