LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Supra Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission System - Service Information >> Shift Lever >> Removal [03/2019 - 07/2020] >> Procedure

Removal [03/2019 - 07/2020]: Procedure

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 

    Refer to REMOVAL [03/2019 - ]

  2. REMOVE FRONT CONSOLE BOX 

    Refer to REMOVAL [03/2019 - 07/2020]

  3. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY 
    NOTE:
    • Electrostatic discharge.

      Damage to or destruction of electrical components.

      • Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
      • For additional information see:

        Refer to PRECAUTION [03/2019 - ]

    1. Loosen the T20 bolts (1).
      GTY926679Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Lift the transmission floor shift assembly (2).
    3. Unlock plug connection (1) and disconnect.
      GTY840476Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the transmission floor shift assembly (2).
scientia non olet · About LEMON Manuals