LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Supra Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine Starting System (B46) - Service Information) >> Engine Switch >> Removal [07/2020 - ] >> Procedure

Removal [07/2020 - ]: Procedure

WARNING: This page is about a different car, the 2024 Toyota Supra, 2023 Toyota Supra, 2022 Toyota Supra, and 2021 Toyota Supra. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT CONSOLE ARMREST ASSEMBLY 

    Refer to PROCEDURE - Step 2 [07/2020 - 07/2022] , or refer to PROCEDURE - Step 2 [07/2022 - ]

  2. REMOVE CONSOLE SIDE PANEL 

    Refer to PROCEDURE - Step 4 [07/2020 - 07/2022] , or refer to PROCEDURE - Step 4 [07/2022 - ]

  3. REMOVE CONSOLE PANEL AND CONSOLE PANEL RETAINER 

    Refer to REMOVAL [07/2020 - 07/2022] , or refer to REMOVAL [07/2022 - ]

  4. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL 

    Refer to PROCEDURE - Step 6 [07/2020 - 07/2022] , or refer to PROCEDURE - Step 6 [07/2022 - ]

  5. REMOVE NO. 2 INSTRUMENT SIDE PANEL 

    Refer to PROCEDURE - Step 7

  6. REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 11

  7. REMOVE PUSH START SWITCH 
    1. Detach push start switch (1) at the latch mechanisms (2) and remove.
      GTY939502Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals