Removal [07/2020 - ]: Procedure
WARNING: This page is about a different car, the 2024 Toyota Supra, 2023 Toyota Supra, 2022 Toyota Supra, and 2021 Toyota Supra. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE AIR CLEANER HOSE ASSEMBLY
See step 3
- REMOVE NO. 2 AIR CLEANER HOSE WARNING:
- Hot surfaces.
Risk of burning!
- Perform all work only on components that have cooled down.
- Unlock and loosen the connector (1) on the charging pressure sensor.
- Loosen clamp (2).
- Unlock and disconnect the connector (3) from the charge-air temperature sensor.
- Remove T30 bolts (arrows).
- Unlock and loosen the clamp (4) on the turbocharger sub-assembly.
- Guide out and remove No. 2 air cleaner hose (5).
- Hot surfaces.