LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Supra Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior Panels / Trim - Service Information >> COMBINATION SWITCH (for Console Box) >> Removal [03/2019 - 07/2020] >> Procedure

Removal [03/2019 - 07/2020]: Procedure

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 

    Refer to REMOVAL [03/2019 - ]

  2. REMOVE FRONT CONSOLE ARMREST ASSEMBLY 

    See step  2

  3. REMOVE CONSOLE SIDE PANEL 

    See step  4

  4. REMOVE CONSOLE PANEL AND CONSOLE PANEL RETAINER 

    See step  5

  5. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL 

    See step  6

  6. REMOVE FRONT CONSOLE BOX COVER 

    See step  7

  7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY 

    See step  8

  8. REMOVE PATTERN SELECT SWITCH ASSEMBLY 
    NOTE:
    • Electrostatic discharge.

      Damage to or destruction of electrical components.

      • Leave electrical components in original packaging until just before they are installed. Use the original packaging only for any return shipments. Always package removed components straight away.
      • Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
      • Antistatic work clothing and antistatic shoes (with ESD symbol).
      • For additional information see:

        Refer to PRECAUTION [03/2019 - ]

    1. Loosen T20 screws (1).
      GTY892770Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Detach the claws (3).
    3. Remove the pattern select switch assembly (2).
scientia non olet · About LEMON Manuals