DTC U0208: Lost Communication with "Seat Control Module A" [10/2023 - 11/2024]: Procedure

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [10/2023 - 11/2024]

   for Type A:

   Body Electrical > Main Body > Clear DTCs 

   for Type B:

   Body Electrical > Main Body > Clear DTCs 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

1. Check for DTCs.

   Refer to DTC CHECK / CLEAR [10/2023 - 11/2024]

   for Type A:

   Body Electrical > Main Body > Trouble Codes 

   for Type B:

   Body Electrical > Main Body > Trouble Codes 

   OK

   DTC U0208 is not output.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

USE SIMULATION METHOD TO CHECK 

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - ]

Result: 

NG 

GO TO CAN COMMUNICATION SYSTEM 

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [02/2019 - ]