DTC P1366-29: "E" Camshaft Position Actuator Bank 1 Signal Invalid [02/2019 - 06/2020]: Description

WARNING: This page is about a different variant/trim than selected.

Refer to DTC P0010-01.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Memory	Note
P1366-29	"E" Camshaft Position Actuator Bank 1 Signal Invalid	Malfunction in diagnostic signal (VTM) of cam timing control motor with EDU assembly is detected for 3 seconds (1 trip detection logic).	Cam timing control motor with EDU assembly Open or short in cam timing control motor with EDU assembly circuit ECM	Comes on	DTC stored	SAE Code: P1366