Installation [11/2018 - ]: Procedure

1. Connect the connector.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *A

   w/o Grille Shutter

   *B

   w/ Grille Shutter

2. Attach the clamp to install the cooler thermistor (ambient temperature sensor).

1. for Off Road Package:

   Refer to INSTALLATION [11/2018 - 02/2019] , or refer to INSTALLATION [02/2019 - 08/2020] , or refer to INSTALLATION [08/2020 - 12/2021] , or refer to INSTALLATION [12/2021 - ]

2. except Off Road Package:

   Refer to INSTALLATION [11/2018 - 02/2019] , or refer to INSTALLATION [02/2019 - 08/2020] , or refer to INSTALLATION [08/2020 - 12/2021] , or refer to INSTALLATION [12/2021 - ]

Refer to INSTALLATION [11/2018 - 02/2019] , or refer to INSTALLATION [02/2019 - 12/2021] , or refer to INSTALLATION [12/2021 - ]