Diagnosis System [12/2021 - ]
WARNING: This page is about a different variant/trim than selected.
- DIAGNOSIS FUNCTION
- The diagnosis function turns off the cruise control indicator and displays a warning message when a malfunction is detected. When a malfunction is detected in the dynamic radar cruise control system, DTCs are stored in the hybrid vehicle control ECU assembly or millimeter wave radar sensor assembly.
*a Cruise Control Indicator
(Constant Speed Control Mode)*b Cruise Control Indicator
(Vehicle-to-vehicle Distance Control Mode)NOTE:As data stored in the ECU will be cleared, do not remove any fuses or disconnect the cable from the negative (-) battery terminal before the inspection is complete.
HINT:
When the system returns to normal, the warning message "Cruise Control Malfunction Visit Your Dealer" displayed on the multi-information display will be cleared.
- The diagnosis function turns off the cruise control indicator and displays a warning message when a malfunction is detected. When a malfunction is detected in the dynamic radar cruise control system, DTCs are stored in the hybrid vehicle control ECU assembly or millimeter wave radar sensor assembly.