LEMON Manuals
: Even more car manuals for everyone
Home
>>
Toyota
>>
2020
>>
RAV4 XLE, AWD
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 74 (Automatic Transaxle System (UB80E) - Service Information (6 Of 6))
>>
Oil Pump
>>
Disassembly [11/2018 - 10/2019]
>>
Procedure
Disassembly [11/2018 - 10/2019]: Procedure
WARNING:
This page is about a different variant/trim than selected.
REMOVE CLUTCH DRUM OIL SEAL RING
Remove the 4 clutch drum oil seal rings from the stator shaft assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
NOTE:
Do not expand the gap of the clutch drum oil seal rings excessively.
REMOVE OIL STRAINER ASSEMBLY
Using a T30 "TORX" socket wrench, remove the 2 "TORX" bolts and oil strainer assembly from the front oil pump cover sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STATOR SHAFT ASSEMBLY
Remove the 5 bolts and stator shaft assembly from the front oil pump body.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT OIL PUMP DRIVE GEAR
Remove the front oil pump drive gear from the front oil pump body.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT OIL PUMP DRIVEN GEAR
Remove the front oil pump driven gear from the front oil pump body.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT OIL PUMP BODY
Remove the front oil pump body from the front oil pump cover sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE RING PIN
Remove the 2 ring pins from the front oil pump cover sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002