Weak Blower Output [11/2018 - ]: Description
WARNING: This page is about a different variant/trim than selected.
If the blower airflow volume is weak regardless of the integration control and panel assembly being normal, the following causes are possible.
| Malfunction Status |
Factor |
- Blower airflow volume is continuously weak
- Blower airflow volume is sometimes weak
|
- Communication malfunction between air conditioning amplifier assembly and blower with fan motor sub-assembly
- Air conditioning amplifier assembly malfunction
- Blower with fan motor sub-assembly malfunction
- Clean air filter is clogging
- Evaporator or heater core fin clogging
- ECO drive mode function (air flow volume is restricted due to ECO drive mode being selected)
- Aspirator dropped
|