Caution / Notice / Hint
WARNING: This page is about a different variant/trim than selected.
NOTE:
- When DTC B1441, B1442, B1446 and B1448 are output at the same time, the No. 1 air conditioning radiator damper servo sub-assembly is malfunctioning.
- Confirm that no mechanical problem is present because this diagnostic code can be output when either a damper link or the damper is mechanically locked.
- When installing the servo motor, make sure to install it correctly.
- When the servo motor is replaced, be sure to perform servo motor initialization.
Refer to INITIALIZATION [02/2019 - ]