LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> RAV4 XLE, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 56 (Engine Starting System (A25A-FXS) - Service Information) >> Ignition Switch >> Installation [02/2019 - ] >> Procedure

Installation [02/2019 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY 
    1. Attach the 2 claws to install the ignition or starter switch assembly to the upper steering column bracket assembly.
    2. Connect the ignition or starter switch assembly connector.
  2. INSTALL LOWER STEERING COLUMN COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 11

scientia non olet · About LEMON Manuals