LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> RAV4 XLE, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 48 (Heating / Air Conditioning System (HV) - Diagnostics - Introduction (1 Of 2)) >> AIR CONDITIONING SYSTEM (for HV Model) >> Customize Parameters [11/2018 - 02/2019] >> Customize Parameters [11/2018 - 02/2019]

Customize Parameters [11/2018 - 02/2019]

WARNING: This page is about a different variant/trim than selected.
  1. CUSTOMIZE AIR CONDITIONING SYSTEM 
    1. Customizing with the Techstream.
      NOTE:
      • When the customer requests a change in a function, first make sure that the function can be customized.
      • Be sure to make a note of the current settings before customizing.
      • When troubleshooting a function, first make sure that the function is set to the default setting.

      HINT: 

      The following items can be customized.

      1. Connect the Techstream.
      2. Turn the power switch on (IG).
      3. Turn the Techstream on.
      4. Enter the following menus: Customize Setting / Air Conditioner.
      5. Select the setting by referring to the table below.

        Air Conditioner 

        Tester Display Description Default Setting ECU
        S-FLOW Control Auto Function Function to turn the S-FLOW control on automatically when the power switch is turned on (IG) ON 0:ON, 1:OFF Air conditioning amplifier assembly
        Set Temperature Shift Function to perform control with the shifted temperature versus the displayed temperature Normal 00001:-2C, 00010:-1C, 00100:Normal, 01000:+1C, 10000:+2C Air conditioning amplifier assembly
        Evaporator Control Function to set the evaporator control to the automatic position (Automatic) to save power or to the coldest position (Manual) to dehumidify the air and to prevent the windows from fogging up Automatic 0:Automatic, 1:Manual Air conditioning amplifier assembly
        Compressor Mode Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off Automatic 0:Automatic, 1:Manual Air conditioning amplifier assembly
        Air Inlet Mode Function to change the mode automatically to recirculation air mode when turning the A/C on to cool the cabin quickly Automatic 0:Automatic, 1:Manual Air conditioning amplifier assembly
        Foot/DEF Auto Mode Function to turn the airflow to foot/defroster automatically when AUTO mode is on ON 0:ON, 1:OFF Air conditioning amplifier assembly
        Foot/DEF Automatic Blow Up Function Function to increase the blower level automatically when the defroster is on ON 0:ON, 1:OFF Air conditioning amplifier assembly
        Ambient Temperature Shift Function to display the shifted ambient temperature versus the actual ambient temperature Normal 0000001:-3C, 0000-010:-2C, 0000-100:-1C, 0001-000:Normal, 0010-000:+1C, 0100-000:+2C, 1000-000:+3C Air conditioning amplifier assembly
        ECO MODE Cancel Function to cancel ECO mode when set to ON ON 0:OFF, 1:ON Air conditioning amplifier assembly
        Noise and Vibration Reduction Function to change the speed of the compressor when set to ON OFF 0:OFF, 1:ON Air conditioning amplifier assembly
        Refrigerant Shortage Check Function to cancel the refrigerant shortage check (check performed during normal operation) when set to ON ON 0:ON, 1:OFF Air conditioning amplifier assembly
        Fan speed increment control Function to set the speed to reach the target blower fan speed when AUTO mode is on Normal 001:Slow, 010:Normal, 100:Fast Air conditioning amplifier assembly
        Outside Air Mode Auto Switch Function Function to automatically change the air inlet to FRESH mode when the power switch is off for 60 seconds ON 0:ON, 1:OFF Air conditioning amplifier assembly
    2. Customizing with the multi-display.
      1. Turn the power switch on (IG).
      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Climate settings.
      3. Select the setting by referring to the table below.
        CLIMATE SETTINGS

        Display Default Content Setting ECU
        Auto A/C Mode On Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off On or Off Air conditioning amplifier assembly
        Efficient Ventilation Mode On Function to change the mode automatically to recirculation air mode when turning the A/C on to cool the cabin quickly On or Off Air conditioning amplifier assembly
scientia non olet · About LEMON Manuals