Skid Control ECU Communication Stop Mode [02/2019 - 12/2021]: Description

WARNING: This page is about a different variant/trim than selected.

Detection Item	Symptom	Trouble Area
Skid Control ECU Communication Stop Mode	Any of the following conditions are met: Communication stop for "Skid Control (ABS/VSC/TRAC)" is indicated on the "Communication Bus Check" screen of the Techstream. Refer to PROBLEM SYMPTOMS TABLE [02/2019 - 06/2020] , or refer to PROBLEM SYMPTOMS TABLE [06/2020 - 08/2020] , or refer to PROBLEM SYMPTOMS TABLE [08/2020 - 12/2021] Communication stop history for "Skid Control (ABS/VSC/TRAC)" is indicated on the "Communication Bus Check (Detail)" screen of the Techstream. (The Lost Communication Time value for "Skid Control (ABS/VSC/TRAC)" is 6 or more.) Refer to PROBLEM SYMPTOMS TABLE [02/2019 - 06/2020] , or refer to PROBLEM SYMPTOMS TABLE [06/2020 - 08/2020] , or refer to PROBLEM SYMPTOMS TABLE [08/2020 - 12/2021] Communication system DTCs (DTCs that start with U) that correspond to "Skid Control ECU Communication Stop Mode" in "DTC Combination Table" are output. Refer to DTC COMBINATION TABLE [02/2019 - 10/2019] , or refer to DTC COMBINATION TABLE [10/2019 - 06/2020] , or refer to DTC COMBINATION TABLE [06/2020 - 08/2020] , or refer to DTC COMBINATION TABLE [08/2020 - 12/2021]	Brake booster with master cylinder assembly (skid control ECU) branch wire or connector Power source circuit of brake booster with master cylinder assembly (skid control ECU) Brake booster with master cylinder assembly (skid control ECU) ground circuit Brake booster with master cylinder assembly (skid control ECU)