Hybrid Battery ECU Communication Stop Mode [06/2020 - 12/2021]: Description

WARNING: This page is about a different variant/trim than selected.

Detection Item	Symptom	Trouble Area
Hybrid Battery ECU Communication Stop Mode	Any of the following conditions are met: Communication stop for "HV Battery" is indicated on the "Communication Bus Check" screen of the Techstream. Refer to PROBLEM SYMPTOMS TABLE [06/2020 - 08/2020] , or refer to PROBLEM SYMPTOMS TABLE [08/2020 - 12/2021] Communication stop history for "HV Battery" is indicated on the "Communication Bus Check (Detail)" screen of the Techstream. (The Lost Communication Time value for "HV Battery" is 6 or more.) Refer to PROBLEM SYMPTOMS TABLE [06/2020 - 08/2020] , or refer to PROBLEM SYMPTOMS TABLE [08/2020 - 12/2021] Communication system DTCs (DTCs that start with U) that correspond to "Hybrid Battery ECU Communication Stop Mode" in "DTC Combination Table" are output. Refer to DTC COMBINATION TABLE [06/2020 - 08/2020] , or refer to DTC COMBINATION TABLE [08/2020 - 12/2021]	Battery ECU assembly branch wire or connector Power source circuit of battery ECU assembly Battery ECU assembly ground circuit Battery ECU assembly