Removal [11/2018 - 02/2019]: Procedure
WARNING: This page is about a different variant/trim than selected.
- DRAIN ENGINE COOLANT
Refer to REPLACEMENT [11/2018 - 02/2019]
- REMOVE INVERTER WITH CONVERTER ASSEMBLY
Refer to REMOVAL [11/2018 - 02/2019]
- REMOVE ENGINE COOLANT TEMPERATURE SENSOR
- Disconnect the engine coolant temperature sensor connector.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the clip and engine coolant temperature sensor from the water outlet.
NOTE:
If the engine coolant temperature sensor has been struck or dropped, replace it.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|