LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> RAV4 XLE, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Hybrid Transaxle System (P710) - Service Information (2 Of 2)) >> Shift Lever Position Sensor >> Adjustment [02/2019 - ] >> Procedure

Adjustment [02/2019 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. SECURE VEHICLE 
    1. Fully apply the parking brake and chock a wheel.
      WARNING:
      • Make sure to apply the parking brake and chock a wheel before performing this procedure.
      • If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.
      GTY655852Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT SHIFT LEVER POSITION SENSOR POSITION 
    1. Turn the ignition switch ON (READY).
    2. Move the shift lever to D and release the brake pedal.
      WARNING:

      Be sure to apply the parking brake and chock all 4 wheels to secure the vehicle.

    3. Slowly move the shift lever to N and measure the moving distance (A) of the shift lever from the original point to the gear disengagement point.
      GTY774271Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Gear Disengagement Point
      NOTE:

      Be sure to move the shift lever slowly.

    4. Move the shift lever to R and release the brake.
      WARNING:

      Be sure to apply the parking brake and chock all 4 wheels to secure the vehicle.

    5. Slowly move the shift lever to N and measure the moving distance (B) of the shift lever from the original point to the gear disengagement point.
      NOTE:

      Be sure to move the shift lever slowly.

    6. Check that the moving distances (A) and (B) shown in the illustration are almost the same.

      HINT: 

      • If the moving distances (A) and (B) are almost the same, adjustment of the shift lever position is not necessary.
      • If the moving distance (A) is shorter than (B), perform step [#1] of Adjust Shift Lever Position Sensor Position.
      • If the moving distance (B) is shorter than (A), perform step [#2] of Adjust Shift Lever Position Sensor Position.
  3. ADJUST SHIFT LEVER POSITION SENSOR POSITION 
    1. If the moving distance (A) is shorter than (B). [#1]

      HINT: 

      If the shift lever is moved from R to N, the moving distance of the shift lever from the original point to the gear disengagement point becomes longer.

      1. Move the shift lever to N.
      2. Loosen the 2 bolts.
        GTY853655Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        NOTE:
        • Do not loosen the bolts by more than 2 rotations, or by more than 2.0 mm (0.0787 in.).
        • If the bolts are loosened more than 2 rotations or 2.0 mm (0.0787 in.), replace them with new one.
      3. Slightly turn the shift lever position sensor clockwise.
        GTY745280Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      4. Tighten the 2 bolts.

        Torque: 11 N.m (112 kgf/cm, 8 ft.lbf) 

        GTY853655Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      5. Check the shift lever position sensor position.
    2. If the moving distance (B) is shorter than (A). [#2]

      HINT: 

      If the shift lever is moved from D to N, the moving distance of the shift lever from the original point to the gear disengagement point becomes longer.

      1. Move the shift lever to N.
      2. Loosen the 2 bolts.
        GTY853655Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        NOTE:
        • Do not loosen the bolts by more than 2 rotations, or by more than 2.0 mm (0.0787 in.).
        • If the bolts are loosened more than 2 rotations or 2.0 mm (0.0787 in.), replace them with new one.
      3. Slightly turn the shift lever position sensor counterclockwise.
        GTY745271Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      4. Tighten the 2 bolts.

        Torque: 11 N.m (112 kgf/cm, 8 ft.lbf) 

        GTY853655Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      5. Check the shift lever position sensor position.
scientia non olet · About LEMON Manuals