DTC B2782: Power Source Control ECU Malfunction [12/2021 - ]: Description
WARNING: This page is about a different variant/trim than selected.
As this DTC is not normally output, it may be due to noise in the LIN communication system, etc.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| B2782 | Power Source Control ECU Malfunction | One of the following conditions is met (1-trip detection logic (Only output while a malfunction is present and the power switch is on (IG).)):
|
ID code box (immobiliser code ECU) | DTC Output Confirmation Operation:
|
VEHICLE CONDITION AND FAIL-SAFE FUNCTION WHEN MALFUNCTION DETECTED
| Vehicle Condition when Malfunction Detected | Fail-safe Function when Malfunction Detected |
|---|---|
| Hybrid control system cannot be started | Prohibits the hybrid control system from being started. |
RELATED DATA LIST AND ACTIVE TEST ITEMS
| DTC No. | Data List and Active Test |
|---|---|
| B2782 | - |