DTC P0ABF-28: Hybrid/EV Battery Current Sensor "A" Signal Bias Level Out of Range / Zero Adjustment Failure [11/2018 - 08/2020]: Wiring Diagram
WARNING: This page is about a different variant/trim than selected.
Refer to the wiring diagram for DTC P0ABF-11.
Refer to WIRING DIAGRAM [11/2018 - 06/2020], or refer to DTC P0ABF-11: Hybrid/EV Battery Current Sensor "A" Circuit Short to Ground; DTC P0ABF-15: Hybrid/EV Battery Current Sensor "A" Circuit Short to Auxiliary Battery or Open; DTC P1CBB-12: Hybrid/EV Battery Current Sensor Power Supply Circuit Short to Auxiliary Battery; DTC P1CBB-14: Hybrid/EV Battery Current Sensor Power Supply Circuit Short to Ground or Open [06/2020 - 08/2020]