DTC B279C-95: Engine Immobiliser System Incorrect Assembly [02/2019 - ]: Procedure
WARNING: This page is about a different variant/trim than selected.
- REPLACE HYBRID VEHICLE CONTROL ECU ASSEMBLY
- Replace the hybrid vehicle control ECU assembly with a new one.
Refer to REMOVAL [02/2019 - 10/2019] , or refer to REMOVAL [10/2019 - 08/2020] , or refer to REMOVAL [08/2020 - 12/2021] , or refer to REMOVAL [12/2021 - 10/2022] , or refer to REMOVAL [10/2022 - 10/2023] , or refer to REMOVAL [10/2023 - ]
Result
Proceed to NEXT
Result:
NEXT
END (HYBRID VEHICLE CONTROL ECU ASSEMBLY WAS DEFECTIVE)
- Replace the hybrid vehicle control ECU assembly with a new one.