LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> RAV4 XLE, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Can Communication System (HV) - Diagnostics - Introduction (01 Of 25)) >> CAN COMMUNICATION SYSTEM (for HV Model) >> Utility [11/2024 - ] >> Utility [11/2024 - ]

Utility [11/2024 - ]

WARNING: This page is about a different variant/trim than selected.
  1. INITIALIZE THE CONNECTION INFORMATION OF A GATEWAY FUNCTION EQUIPPED ECU (BUS MONITOR ECU) 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Central Gateway or Main Body / Utility / Initialization.

      Body Electrical > Central Gateway > Utility 

      Tester Display
      Initialization

      Body Electrical > Main Body > Utility 

      Tester Display
      Initialization
scientia non olet · About LEMON Manuals