LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> RAV4 XLE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Control System (A25A-FKS) - Diagnostic Codes (8 Of 9)) >> SFI System >> DTC P1610-09: Control Module Processor (Brake Override System Input Signal) Component Failure [12/2021 - ] >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2025 Toyota RAV4, 2024 Toyota RAV4, 2023 Toyota RAV4, 2022 Toyota RAV4, and 2021 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

The ECM compares input signal information for brake override system control calculations for control and monitoring. If the ECM determines a malfunction mode in which brake override system operation conditions are not met, a DTC is stored to indicate the brake override system malfunction.

scientia non olet · About LEMON Manuals