Caution / Notice / Hint
WARNING: This page is about a different car, the 2025 Toyota RAV4 and 2024 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If the multiplex network door ECU has been replaced, or if any of the connectors has been disconnected, initialize the power back door system.
Refer to INITIALIZATION [10/2023 - ]
- First perform the communication function inspections in How to Proceed with Troubleshooting to confirm that there are no CAN communication malfunctions before troubleshooting this problem.
- Check the smart entry and start system (for Entry Function) first before troubleshooting the power back door system.
for HV Model:
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2021 - ]
for Gasoline Model:
- Inspect the fuses for circuits related to this system before performing the following inspection procedure.