Customize Parameters [10/2023 - 11/2024]

WARNING: This page is about a different car, the 2025 Toyota RAV4 and 2024 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

CUSTOMIZE POWER BACK DOOR SYSTEM

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.

Customizing with the GTS.

Select the setting by referring to the table below.

for Type A:

PSD & PBD operation

Tester Display	Description	Default	Setting	ECU
PBD SW Operating Condition Setting	Power back door control switch operation.	Short Press (0.04s) or Long Press (0.8s)	$00:Short Press (0.04s),$01:Long Press (0.8s)	Multiplex network door ECU
PBD Buzzer Function	Function that changes the power back door buzzer setting.	OFF	$00:OFF,$01:ON	Multiplex network door ECU
PBD Assist Close Function	Function that enables/disables the power back door assist close operation. When set to ON, the back door will close automatically when operated in the close direction manually.	ON	$00:OFF,$01:ON	Multiplex network door ECU
PBD Assist Open Function	Function that enables or disables the power back door assist open operation. When "PBD Assist Open Operation" is set to "ON" (enabled) the back door will open automatically when the back door opener switch assembly (opener switch) is operated.	ON	$00:OFF,$01:ON	Multiplex network door ECU
PBD Door Unlock with One Motion Setting	Function that selects the door or doors to unlock when the back door is locked and the electrical key transmitter subassembly (electrical key) is pushed to operate the power back door.*1	ALL DOORS	$00:Back Door,$01:All Doors	Multiplex network door ECU
PBD Wireless Function	Function that operates the power back door by pushing the transmitter switch (electrical key transmitter sub-assembly).	ON	$00:OFF,$01:ON	Multiplex network door ECU
PBD Wireless One Motion Function	Wireless one motion function.*2	ON	$00:OFF,$01:ON	Multiplex network door ECU
PBD Wireless SW Setting	Wireless operation setting condition.	1 Time Press, 2 Times Press or Long Press (0.8s)	$00:1 Time Press,$01:2 Times Press,$02:Long Press (0.8s)	Multiplex network door ECU
PBD Kick Sensor Sensitivity Adjust	Function that changes the sensitivity of the kick sensor.*3	+1	$00:Normal,$01:+1,$02:+2	Multiplex network door ECU

*1: Enables when the following conditions are met:
- "PBD Wireless One Motion Function" is set to other than "ON"
*2: Enables when the following conditions are met:
- "Wireless Backdoor Open Operation Adjust" is set to other than "Prohibit"
- "PBD Wireless Function" is set to "ON"
*3: w/ Hands Free Power Back Door

for Type B:

PSD & PBD operation

Tester Display	Description	Default	Setting	ECU
PBD SW Operating Condition Setting	Power back door control switch operation.	Short Press (0.04s) or Long Press (0.8s)	$00:Short Press (0.04s),$01:Long Press (0.8s)	Multiplex network door ECU
PBD Buzzer Function	Function that changes the power back door buzzer setting.	OFF	$00:OFF,$01:ON	Multiplex network door ECU
PBD Assist Close Function	Function that enables/disables the power back door assist close operation. When set to ON, the back door will close automatically when operated in the close direction manually.	ON	$00:OFF,$01:ON	Multiplex network door ECU
PBD Assist Open Function	Function that enables or disables the power back door assist open operation. When "PBD Assist Open Operation" is set to "ON" (enabled) the back door will open automatically when the back door opener switch assembly (opener switch) is operated.	ON	$00:OFF,$01:ON	Multiplex network door ECU
PBD Door Unlock with One Motion Setting	Function that selects the door or doors to unlock when the back door is locked and the electrical key transmitter subassembly (electrical key) is pushed to operate the power back door.*3	ALL DOORS	$00:Back Door,$01:All Doors	Multiplex network door ECU
PBD Wireless Function	Function that operates the power back door by pushing the transmitter switch (electrical key transmitter sub-assembly).	ON	$00:OFF,$01:ON	Multiplex network door ECU
PBD Wireless One Motion Function	Wireless one motion function.*1	ON	$00:OFF,$01:ON	Multiplex network door ECU
PBD Wireless SW Setting	Wireless operation setting condition.	1 Time Press, 2 Times Press or Long Press (0.8s)	$00:1 Time Press,$01:2 Times Press,$02:Long Press (0.8s)	Multiplex network door ECU
PBD Kick Sensor Sensitivity Adjust	Function that changes the sensitivity of the kick sensor.*2	+1	$00:Normal,$01:+1,$02:+2	Multiplex network door ECU
Kick Sensor Operation with ACC ON	Status of the hands free power back door function with ignition switch on (ACC).*2	Not Available	0:Available, 1:Not Available	Main body ECU (multiplex network body ECU)

*1: Enables when the following conditions are met:
- "Wireless Backdoor Open Operation Adjust" is set to other than "Prohibit"
- "PBD Wireless Function" is set to "ON"
*2: w/ Hands Free Power Back Door
*3: Enables when the following conditions are met:
- "PBD Wireless One Motion Function" is set to other than "ON"

Customizing with the multi-information display in the combination meter assembly

Turn the ignition switch to ON.

Select the setting by referring to the table below.

Display	Description	Default	Setting	Relevant ECU
System Settings	Function that enables or disables the power back door operation.	On	On or Off	Multiplex network door ECU
Hands Free*	Function that can be used to set the hands free power back door.	On	On or Off	Multiplex network door ECU
Opening Adjustment	Function that can be used to set the power back door opening angle at 6 different positions.	5	User Setting Position, 5, 4, 3, 2 or 1	Multiplex network door ECU
Volume	Function that can be used to set the power back door warning buzzer volume.	3	3, 2 or 1	Multiplex network door ECU

*: w/ Hands Free Power Back Door