Removal [11/2018 - 08/2020]: Procedure
- REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Pre-collision System)
- Place your fingers at the position shown in the illustration and detach the guide in the removal direction (1).
Place finger here Remove in this Direction (1) Remove in this Direction (2) - Slide the inner rear view mirror stay holder cover in the removal direction (2) and detach the claw.
- Detach the claw and remove the inner rear view mirror stay holder cover.
- Place your fingers at the position shown in the illustration and detach the guide in the removal direction (1).
- REMOVE NO. 2 FORWARD RECOGNITION COVER (w/ Pre-collision System)
Refer to PROCEDURE - Step 1
- REMOVE NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System)
Refer to PROCEDURE - Step 2
- REMOVE INNER REAR VIEW MIRROR ASSEMBLY