- REMOVE BACK DOOR CENTER GARNISH
See step 1 [11/2018 - 10/2023], or see step 1 [10/2023 - ]
- REMOVE BACK DOOR SIDE GARNISH LH
See step 2 [11/2018 - 10/2023], or see step 2 [10/2023 - ]
- REMOVE BACK DOOR SIDE GARNISH RH
HINT:
Use the same procedure described for the LH side.
- REMOVE BACK DOOR GRIP BASE
See step 4 [11/2018 - 10/2023], or see step 4 [10/2023 - ]
- REMOVE BACK DOOR GRIP
HINT:
Use the same procedure described for the back door grip base.
- REMOVE BACK DOOR TRIM BOARD ASSEMBLY
See step 6 [11/2018 - 10/2023], or see step 6 [10/2023 - ]
- REMOVE NO. 1 POWER BACK DOOR CONTROL SWITCH
- Disconnect the connector and detach the clamp.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Detach the claw and remove the No. 1 power back door control switch as shown in the illustration.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
 |
Remove in this Direction |