LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> RAV4 XLE, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) - Service Information (3 Of 4) >> Back Door >> Disassembly [10/2023 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the multiplex network door ECU removal/installation are shown below.

NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED (FOR HV MODEL)

Replaced Part or Performed Procedures Necessary Procedures Effect/Inoperative Function When Necessary Procedures are not Performed Link
  • Multiplex network door ECU
  • Power back door unit assembly LH
  • Power back door unit assembly RH
 Reset connection history There are cases where the connection history display differs from the vehicle condition Refer to DATA LIST / ACTIVE TEST [10/2023 - 11/2024] , or refer to DATA LIST / ACTIVE TEST [11/2024 - ]
Reset back door close position Power back door system Refer to INITIALIZATION [10/2023 - ]
Television camera assembly (Including removal and installation)
  • Parking assist monitor system initialization
  • Television camera assembly optical axis (Back camera position setting)
 Parking assist monitor system Refer to CALIBRATION [10/2022 - ]
Television camera view adjustment Panoramic view monitor system (for HV model) Refer to CALIBRATION [10/2022 - ]
NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED (FOR GASOLINE MODEL)

Replaced Part or Performed Procedures Necessary Procedures Effect/Inoperative Function When Necessary Procedures are not Performed Link
  • Multiplex network door ECU
  • Power back door unit assembly LH
  • Power back door unit assembly RH
 Reset connection history There are cases where the connection history display differs from the vehicle condition Refer to DATA LIST / ACTIVE TEST [10/2023 - 11/2024] , or refer to DATA LIST / ACTIVE TEST [11/2024 - ]
Reset back door close position Power back door system Refer to INITIALIZATION [10/2023 - ]
Television camera assembly (Including removal and installation)
  • Parking assist monitor system initialization
  • Television camera assembly optical axis (Back camera position setting)
 Parking assist monitor system Refer to CALIBRATION [10/2022 - ]
Television camera view adjustment Panoramic view monitor system (for Gasoline model) Refer to CALIBRATION [10/2022 - ]
scientia non olet · About LEMON Manuals