Installation [02/2019 - 08/2020]: Procedure

INSTALL VEHICLE APPROACHING SPEAKER CONTROLLER

Attach the guide and install the vehicle approaching speaker controller with the bolt.

Torque: 12.5 N.m (127 kgf/cm, 9 ft.lbf)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NOTE:

When installing the vehicle approaching speaker controller, take care not to damage it.
Do not reuse a vehicle approaching speaker controller that has been dropped or subjected to a strong shock.

INSTALL HYBRID VEHICLE CONTROL ECU ASSEMBLY
Refer to INSTALLATION [02/2019 - 08/2020]
INSTALL BATTERY HOLE COVER
Refer to PROCEDURE - Step 3
INSTALL REAR NO. 2 FLOOR BOARD
Refer to PROCEDURE - Step 4
INSTALL DECK BOARD ASSEMBLY
Refer to PROCEDURE - Step 5
PERFORM DIAGNOSTIC SYSTEM CHECK
- w/ Occupant Classification System:
  Refer to DTC CHECK / CLEAR [11/2018 - 08/2020]
- w/o Occupant Classification System:
  Refer to DTC CHECK / CLEAR [11/2018 - 08/2020]
CHECK SRS WARNING LIGHT
- w/ Occupant Classification System:
  Refer to OPERATION CHECK [02/2019 - 08/2020]
- w/o Occupant Classification System:
  Refer to OPERATION CHECK [11/2018 - 08/2020]