LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> RAV4 XLE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio / Video System - Service Information >> Radio Receiver >> Removal [11/2018 - 10/2022] >> Procedure

Removal [11/2018 - 10/2022]: Procedure

  1. REMOVE CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL 

    Refer to PROCEDURE - Step 8 [11/2018 - 02/2019] , or refer to PROCEDURE - Step 8 [02/2019 - 10/2019] , or refer to PROCEDURE - Step 8 [10/2019 - 08/2020] , or refer to PROCEDURE - Step 9 [08/2020 - 12/2021] , or refer to PROCEDURE - Step 9 [12/2021 - 10/2022]

  2. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET 
    1. Remove the 4 bolts.
      GTY943841Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. GTY916106Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction

      Detach the clip and remove the radio and display receiver assembly with bracket.

    3. Disconnect each connector.
  3. REMOVE NO. 1 RADIO RECEIVER BRACKET 
    1. Remove the 2 screws and No. 1 radio receiver bracket.
      GTY943842Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE NO. 2 RADIO RECEIVER BRACKET 
    1. Remove the 2 screws and No. 2 radio receiver bracket.
      GTY918250Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals