DTC B2250: Back Door Closer Operation Malfunction [11/2018 - 10/2023]: Description
WARNING: This page is about a different variant/trim than selected.
The multiplex network door ECU receives signals from the latch switch, initial switch, pawl switch and back door courtesy switch, which are built into the back door lock with courtesy light switch assembly. Based on these switch signals, the latch position of the back door lock with courtesy light switch assembly is determined.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B2250 | Back Door Closer Operation Malfunction | While the back door closer is operating, a malfunction is detected in position information from the initial switch within a specified amount of time. |
|