LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> RAV4 LE, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Power Back Door System (HV) - Diagnostics - Introduction) >> POWER BACK DOOR SYSTEM (for HV Model) >> DTC Check / Clear [11/2018 - 10/2023] >> DTC Check / Clear [11/2018 - 10/2023]

DTC Check / Clear [11/2018 - 10/2023]

WARNING: This page is about a different variant/trim than selected.
  1. CHECK FOR DTC 
    1. Turn the power switch off.
    2. Connect the Techstream to the DLC3.
    3. Turn the power switch on (IG).
    4. Turn the Techstream on.
    5. Enter the following menus: Body Electrical / Back Door / Trouble Codes.
    6. Check for DTCs.

      Body Electrical > Back Door > Trouble Codes 

  2. DTC CLEAR 
    1. Turn the power switch off.
    2. Connect the Techstream to the DLC3.
    3. Turn the power switch on (IG).
    4. Turn the Techstream on.
    5. Enter the following menus: Body Electrical / Back Door / Trouble Codes.
    6. Clear the DTCs.

      Body Electrical > Back Door > Clear DTCs 

scientia non olet · About LEMON Manuals