Typical Malfunction Thresholds

OFF malfunction 

1. Any of the following conditions are met: OFF malfunction (A), (B) or (C)
   OFF MALFUNCTION (A) AND (B)
   
   

   Neutral state flag

   ON

   OFF MALFUNCTION (C)
   
   

   Solenoid (SLT) valve

   ON malfunction

   1. Any of the following conditions are met: Condition (a) or (b)
      CONDITION (A)
      
      

      ECM selected gear	3rd
      3rd gear pass detection	Not fixed after transition to latest gear

      CONDITION (B)
      
      

      ECM selected gear	7th
      7th gear pass detection	Not fixed after transition to latest gear

ON malfunction 

1. Any of the following conditions are met: ON malfunction (A), (B), (C), (D), (E) or (F)
   ON MALFUNCTION (A), (B) AND (C)
   
   

   Any of the following conditions are met	(a) or (b)
   (a) Turbine speed/Output speed (NT/NO)	1.817 or more and 2.082 or less (When output speed less than 380 rpm)
   (b) Turbine speed - Output speed x 3rd gear ratio	-50 rpm or more and 50 rpm or less (When output speed 380 rpm or more)

   ON MALFUNCTION (D) AND (E)
   
   

   Any of the following conditions are met	(a) or (b)
   (a) Turbine speed/Output speed (NT/NO)	0.744 or more and 0.876 or less (When output speed less than 780 rpm)
   (b) Turbine speed - Output speed x 7th gear ratio	-50 rpm or more and 50 rpm or less (When output speed 780 rpm or more)

   ON MALFUNCTION (F)
   
   

   Solenoid (SLT) valve

   ON malfunction

   1. Any of the following conditions are met: Condition (a), (b) or (c)
      CONDITION (A)
      
      

      ECM selected gear	4th
      4th gear pass detection	Not fixed after transition to latest gear

      CONDITION (B)
      
      

      ECM selected gear	5th
      5th gear pass detection	Not fixed after transition to latest gear

      CONDITION (C)
      
      

      ECM selected gear	8th
      8th gear pass detection	Not fixed after transition to latest gear

HINT: