Typical Malfunction Thresholds

OFF malfunction 

1. Any of the following conditions are met: OFF malfunction (A), (B), (C) or (D)
   OFF MALFUNCTION (A), (B) AND (C)
   
   

   Neutral state flag

   ON

   OFF MALFUNCTION (D)
   
   

   Solenoid (SLT) valve	ON malfunction
   ECM selected gear	1st, 2nd, 3rd, 4th or 5th
   1st gear pass detection	Not fixed
   2nd gear pass detection	Not fixed
   3rd gear pass detection	Not fixed
   4th gear pass detection	Not fixed
   5th gear pass detection	Not fixed

   HINT: 

   NEUTRAL STATE FLAG:
   
   

   Turbine speed - Output speed x (ECM selected gear ratio)

   1000 rpm or more

ON malfunction 

1. Any of the following conditions are met: ON malfunction (A), (B), (C), (D), (E) or (F)
   ON MALFUNCTION (A)
   
   

   Any of the following conditions are met	(a) or (b)
   (a) Turbine speed/Output speed (NT/NO)	1.368 or more and 1.544 or less (When output speed less than 570 rpm)
   (b) Turbine speed - Output speed x 4th gear ratio	-50 rpm or more and 50 rpm or less (When output speed 570 rpm or more)

   ON MALFUNCTION (B), (D) AND (E)
   
   

   Any of the following conditions are met	(a) or (b)
   (a) Turbine speed/Output speed (NT/NO)	1.129 or more and 1.308 or less (When output speed less than 570 rpm)
   (b) Turbine speed - Output speed x 5th gear ratio	-50 rpm or more and 50 rpm or less (When output speed 570 rpm or more)

   ON MALFUNCTION (C)
   
   

   Any of the following conditions are met	(a) or (b)
   (a) Turbine speed/Output speed (NT/NO)	1.817 or more and 2.082 or less (When output speed less than 380 rpm)
   (b) Turbine speed - Output speed x 3rd gear ratio	-50 rpm or more and 50 rpm or less (When output speed 380 rpm or more)

   ON MALFUNCTION (F)
   
   

   Solenoid (SLT) valve	ON malfunction
   ECM selected gear	6th, 7th or 8th
   6th gear pass detection	Not fixed
   7th gear pass detection	Not fixed
   8th gear pass detection	Not fixed