DTC P0ABF-28: Hybrid/EV Battery Current Sensor "A" Signal Bias Level Out of Range / Zero Adjustment Failure [06/2020 - ]: Description
WARNING: This page is about a different variant/trim than selected.
Refer to the description for DTC P0ABF-11.
Refer to DESCRIPTION
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate |
|---|---|---|---|---|---|
| P0ABF-28 | Hybrid/EV Battery Current Sensor "A" Signal Bias Level Out of Range / Zero Adjustment Failure | The offset value of the battery current sensor is excessively large. (1 trip detection logic) |
|
Comes on | Master Warning: Comes on |
RELATED DATA LIST
| DTC No. | Data List |
|---|---|
| P0ABF-28 | Hybrid/EV Battery Current |
HINT:
- Make sure to perform Current Sensor Offset Learning after replacing a battery current sensor.
- This DTC may be output if Current Sensor Offset Learning has not been completed.