DTC Summary
WARNING: This page is about a different variant/trim than selected.
- MALFUNCTION DESCRIPTION
This DTC is stored when the motor generator control system is malfunctioning and current does not flow as commanded. The cause of this malfunction may be one of the following:
Area Main Malfunction Description Inside of inverter Inverter with converter assembly internal circuit malfunction Hybrid vehicle transaxle assembly - Motor (MG2) internal malfunction (entry of foreign matter, etc.)
- Open or short circuit in the motor coils
Inverter low-voltage circuit The connectors are not connected properly Motor cable (for MG2) - Defective motor cable (for MG2) connection
- Open circuit or poor insulation on motor cable (for MG2)
Hybrid vehicle control ECU assembly Hybrid vehicle control ECU assembly internal circuit malfunction