LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> RAV4 LE, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 109 (Motor Generator Control System (AWD, W/ Nickel Metal Hydride Battery) - Diagnostic Codes (4 Of 5)) >> MOTOR GENERATOR CONTROL SYSTEM (for AWD with NICKEL METAL HYDRIDE BATTERY) >> DTC P0E51-2A: DC/DC Converter Current Sensor Signal Stuck In Range [02/2019 - ] >> Wiring Diagram

DTC P0E51-2A: DC/DC Converter Current Sensor Signal Stuck In Range [02/2019 - ]: Wiring Diagram

WARNING: This page is about a different variant/trim than selected.

Refer to the wiring diagram for the Inverter Low-voltage Circuit.

Refer to Inverter Low-voltage Circuit [02/2019 - ]

Refer to the wiring diagram for the HV Battery High-voltage Line Circuit.

Refer to HV Battery High-voltage Line Circuit [02/2019 - 12/2021] , or refer to HV Battery High-voltage Line Circuit [12/2021 - ]