Typical Enabling Conditions
WARNING: This page is about a different car, the 2025 Toyota RAV4, 2024 Toyota RAV4, 2023 Toyota RAV4, 2022 Toyota RAV4, and 2021 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
P106A
| Monitor runs whenever the following DTCs are not stored | P0106, P0107, P0108 (Manifold absolute pressure) P0400 (EGR system) P0401 (EGR system (closed)) P0452, P0453 (Evaporative emission system pressure sensor) |
| Time after ignition switch off | 50 minutes |
| Time after ECM started by soak-timer | 60 seconds or more |
| Battery voltage | 8 V or higher |
| Intake air temperature | -10°C (14°F) or higher |
| Engine coolant temperature | -10°C (14°F) or higher |
P106C
| Monitor runs whenever the following DTCs are not stored | None |
| Time after ignition switch off | 50 minutes |
| Time after ECM started by soak-timer | 60 seconds or more |
| Battery voltage | 8 V or higher |
| Intake air temperature | -10°C (14°F) or higher |
| Engine coolant temperature | -10°C (14°F) or higher |
| EVAP system pressure sensor malfunction (P0451, P0452, P0453) | Not detected |