VEHICLE CONTROL HISTORY (RoB) [10/2023 - ]
WARNING: This page is about a different car, the 2025 Toyota RAV4 and 2024 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If the vehicle or vehicle controls are operated (for example, during initial inspection when the vehicle is brought in for repair) before vehicle control history has been read out and saved, the vehicle control history information could be lost.
- The function "Read vehicle control history" uses the current system time setting inside the GTS and the time counter inside the controlling ECU to calculate the timings shown in the vehicle control history. For this reason, before reading out the vehicle control history, first make sure that the GTS system clock is accurately set to the current time.
- The time counter in the control ECU may deviate by up to +/- 10% due to the characteristics of the time counter.
- The time counter in the control ECU is reset approximately 34 days before the "Current" value due to the characteristics of the time counter. Therefore, the time information stored before the 34th day may not be accurately displayed.
- VEHICLE CONTROL HISTORY (RoB)
- Check vehicle control history (RoB) according to the display on the GTS.
Body Electrical > Back Door > Utility
Tester Display Vehicle Control History (RoB) RoB Code RoB Item Item description X283E Back Door Operation History Memorize the factors when the power back door operated X2903 Back Door Non-Operation History Memorize the factors when the power back door non-operation X2907* Kick Sensor Non-Operation History Memorize the factors when the hands free power back door non-operation *: w/ Hands Free Power Back Door
- Check vehicle control history (RoB) according to the display on the GTS.
- CLEAR VEHICLE CONTROL HISTORY (RoB) NOTE:
Performing following procedure will delete all vehicle control history (RoB) records.