Caution / Notice / Hint

NOTE:

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
Inspect the bulbs before performing the following procedure.
If the headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight ECU sub-assembly LH.
w/ Headlight ECU without AFS:

Refer to INITIALIZATION [11/2018 - 12/2021]

w/ AFS:

Refer to INITIALIZATION [02/2019 - 12/2021]