LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> RAV4 LE, AWD >> Repair and Diagnosis >> Electrical >> Gauges >> Meter / Gauge / Display - Service Information >> Combination Meter >> Removal [10/2022 - ] >> Procedure

Removal [10/2022 - ]: Procedure

  1. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH 

    Refer to PROCEDURE - Step 11

  2. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 12

  3. REMOVE COMBINATION METER ASSEMBLY 
    1. for 7 Inch Display:
      1. Remove the 4 screws.
        GTY937132Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      2. Pull towards the rear of the vehicle to detach the clip and guide and remove the combination meter assembly.
        GTY868413Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        Remove in this Direction
      3. Detach the clamp and disconnect the 2 connectors.
        GTY986435Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. for 12.3 Inch display:
      1. Remove the 4 screws.
        GTY1119997Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      2. Pull towards the rear of the vehicle to detach the clip and guide and remove the combination meter assembly.
        GTY1121184Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        Remove in this Direction
      3. Detach the clamp and disconnect the 2 connectors.
        GTY1120006Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals