LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> RAV4 LE, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Hydraulic) - Service Information (2 Of 2) >> BRAKE BOOSTER (w/ Vacuum Brake Booster) >> Reassembly [11/2018 - ] >> Procedure

Reassembly [11/2018 - ]: Procedure

  1. INSTALL VACUUM SENSOR ASSEMBLY (w/ Stop And Start System) 

    Refer to INSTALLATION [11/2018 - ]

  2. INSTALL VACUUM WARNING SWITCH ASSEMBLY 
    1. Install a new vacuum warning switch grommet to the brake booster assembly.
    2. Install the vacuum warning switch assembly to the brake booster assembly as shown in the illustration.
      GTY850772Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a 45°
      Up
  3. INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY 
    1. Install a new check valve grommet to the brake booster assembly.
    2. Install the brake vacuum check valve assembly to the brake booster assembly.
      GTY862643Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a 45°
      Up
scientia non olet · About LEMON Manuals