LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> RAV4 LE, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Deterrent System - Service Information >> Transponder Key Ecu >> Installation [02/2019 - ] >> Procedure

Installation [02/2019 - ]: Procedure

  1. INSTALL TRANSPONDER KEY ECU (IMMOBILISER CODE ECU) 
    NOTE:

    Do not reuse dropped or damaged parts.

    1. GTY848702Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction (1)
      Install in this Direction (2)

      Attach in the direction indicated by the arrow (1) shown in the illustration to attach the guide.

    2. Attach in the direction indicated by the arrow (2) shown in the illustration to attach the claw to install the transponder key ECU (immobiliser code ECU).
  2. INSTALL INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT ASSEMBLY 
  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Refer to INITIALIZATION [02/2019 - 10/2019] , or refer to INITIALIZATION [10/2019 - 06/2020] , or refer to INITIALIZATION [06/2020 - 08/2020] , or refer to INITIALIZATION [08/2020 - 12/2021] , or refer to INITIALIZATION [12/2021 - 10/2022] , or refer to INITIALIZATION [10/2022 - 10/2023] , or refer to INITIALIZATION [10/2023 - ]

  4. CHECK SRS WARNING LIGHT 

    Refer to OPERATION CHECK [11/2018 - 08/2020] , or refer to OPERATION CHECK [08/2020 - ]

  5. PERFORM DIAGNOSTIC SYSTEM CHECK 

    Refer to DTC CHECK / CLEAR [11/2018 - 08/2020] , or refer to DTC CHECK / CLEAR [08/2020 - ]

  6. PERFORM CODE REGISTRATION