Caution / Notice / Hint
NOTE:
- When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
- Before replacing the main body ECU (multiplex network body ECU), refer to smart key system (for Start Function).
For HV Model:
Refer to REGISTRATION [11/2018 - 10/2019] , or refer to REGISTRATION [10/2019 - 12/2021]
For Gasoline Model:
Refer to REGISTRATION [11/2018 - 10/2019] , or refer to REGISTRATION [10/2019 - 08/2020] , or refer to REGISTRATION [08/2020 - 12/2021]
HINT:
- Setting the meter illumination level to maximum brightness prevents the meter illumination from dimming when the light control switch is changed to the tail, head or AUTO position at night. Therefore, check the meter illumination setting before proceeding to the following steps.
- The automatic light control sensor sensitivity can be customized.
w/ Headlight ECU without AFS:
Refer to CUSTOMIZE PARAMETERS [11/2018 - 12/2021]
w/o Headlight ECU:
Refer to CUSTOMIZE PARAMETERS [11/2018 - 12/2021]
w/ AFS: