Removal [04/2018 - 08/2020]: Procedure
WARNING: This page is about a different car, the 2022 Toyota Avalon, 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE CONSOLE BOX POCKET
- Remove the console box pocket.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE CONSOLE BOX CARPET
- Remove the console box carpet.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH
- Disengage the 9 clips as shown in the illustration to remove the lower instrument panel finish panel LH.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
 |
Remove in this Direction |
- REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH
- Disengage the 8 clips as shown in the illustration to remove the lower instrument panel finish panel RH.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
|
Remove in this Direction |
- REMOVE FRONT CONSOLE UPPER PANEL GARNISH
- Disengage the 6 clips as shown in the illustration.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
|
Remove in this Direction |
- Disconnect the 4 connectors.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Disengage the 2 clamps to remove the front console upper panel garnish.
- REMOVE CONSOLE BOX POCKET SUB-ASSEMBLY
- Disengage the 12 clips as shown in the illustration to remove the console box pocket sub-assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
|
Remove in this Direction (1) |
 |
Remove in this Direction (2) |
- REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
- Remove the 4 screws.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Disengage the 2 clips and 2 guides as shown in the illustration to remove the center instrument cluster finish panel sub-assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
|
Remove in this Direction |
- REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
for Gasoline Model: Refer to PROCEDURE - Step 1
for HV Model: Refer to PROCEDURE - Step 1
- REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
- Disengage the 7 clips as shown in the illustration.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
|
Remove in this Direction |
- Disconnect the 2 connectors to remove the rear upper console panel sub-assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE INSTRUMENT PANEL FINISH PANEL END LH
- Disengage the 2 claws, clip and guide as shown in the illustration to remove the instrument panel finish panel end LH.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
 |
Place Hand Here |
|
Remove in this Direction |
- REMOVE CONSOLE BOX BEZEL
- Disengage the 6 clips as shown in the illustration.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
|
Remove in this Direction |
- Disconnect the connector to remove the console box bezel.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE UPPER FRONT CONSOLE PANEL SUB-ASSEMBLY
- Disengage the 4 clips as shown in the illustration.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
|
Remove in this Direction |
- Disconnect the connector and disengage the clamp to remove the upper front console panel sub-assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE CONSOLE ASSEMBLY
- Disconnect the 2 connectors.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the 4 bolts and 2 screws.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Disengage the 2 clips as shown in the illustration to remove the console assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
|
Remove in this Direction |