DTC C1434: Steering Angle Sensor Output [04/2018 - ]: Description
WARNING: This page is about a different car, the 2022 Toyota Avalon, 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
Steering angle sensor signals are input to the skid control ECU (brake booster with master cylinder assembly) via the CAN communication system.
HINT:
When a malfunction occurs in the communication line to the steering angle sensor, U0126 (Lost Communication With Steering Angle Sensor Module) is output.
If a DTC related to the CAN communication line is output, first troubleshoot the CAN communication line.
DTCs may be stored if one of the following occurs:
- Steering angle sensor zero point malfunction.
- Steering angle sensor signal malfunction.
- Steering angle sensor installation abnormality.
| DTC No. | Detection Item | INF Code | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|---|
| C1434 | Steering Angle Sensor Output | 701 | When communication is normal, a steering angle sensor malfunction is detected. |
|
Does not come on | VSC DTC |